Bal-tec™ Home Products Catalog
Bal-tec Products Catalog
45 Degree Angle Block
45 Degree Angle Block is used to hold Probe
Characterizing Spheres inclined at 45 degrees so it
is more accessible for C.M.M. Calibration.
See: Tech Data Sheet:
CMM-ll
| Part # | Description | Price | Purchase |
|---|---|---|---|
| BLK-45 | BLOCK, 45 DEGREE | $130.00 |  |
The Abalone
The Abalone is a vacuum hold down foot that can
be used to couple a number of devices to the C. M. M.
or C. N. C. tables. These include the Anchor, Probe
Characterizing Spheres and the Big One.
See: Tech Data Sheet
CMM-13 Page 1B
| Part # | Description | Price | Purchase |
|---|---|---|---|
| 10140 | ABALONE, 5" DIAMETER X 1.5" THICK | $165.00 | |
The Adjustable Ball Bar (Dumbbell) Kit
The Adjustable Ball Bar (Dumbbell) Kit
is most commonly used when different size machines must
be evaluated, it is easy for traveling. The kit includes
one piece of 50 mm, 100 mm, 200 mm, 400 mm and 800 mm bar
length, 3 precision spheres, 3 adjusting pins and set
screws.
See: Tech Data Sheet
CMM-10
| Part # | Description | Price | Purchase |
|---|---|---|---|
| ABB-K | ADJUSTABLE BALL BAR KIT, EIGHT PIECES | $1133.00 | |
| ABB-INV-K | ADJUSTABLE BALL BAR KIT, INVAR® | $1617.00 | |
| ABB-K-CASE | ADJUSTABLE BALL BAR KIT, STEEL WITH CASE | $1463.00 | |
| ABB-INV-K-CASE | ADJUSTABLE BALL BAR KIT, INVAR®, WITH CASE | $1947.00 | |
| ABB-CASE | ADJUSTABLE BALL BAR CASE, RIGID PLASTIC | $330.00 | |
Adjustable Ball Bars (Dumbbells)
The Adjustable Ball Bars (Dumbbells) can be
assembled to make many different lengths of Ball Bars
(Dumbbells), with sphere center to center dimensions
from 50 mm ( 1.968 inches) to 1650 mm (64.96
inches), in 50 mm (1.969 inches) increments.
See: Tech Data Sheet:
CMM-10
| Part # | Bar Length | Metric | Description | Price | Purchase |
|---|---|---|---|---|---|
| ABB-25 | 0.984" | 25 mm | ADJUSTABLE BALL BAR LENGTH, 025 MM, 0.984 INCHES | $66.00 | |
| ABB-50 | 1.969" | 50 mm | ADJUSTABLE BALL BAR LENGTH, 050 MM, 1.968 INCHES | $66.00 | |
| ABB-100 | 3.937" | 100 mm | ADJUSTABLE BALL BAR LENGTH, 100 MM, 3.937 INCHES | $109.00 | |
| ABB-200 | 7.874" | 200 mm | ADJUSTABLE BALL BAR LENGTH, 200 MM, 7.874 INCHES | $115.00 | |
| ABB-400 | 15.748" | 400 mm | ADJUSTABLE BALL BAR LENGTH, 400 MM, 15.748 INCHES | $120.00 | |
| ABB-600 | 23.622" | 600 mm | ADJUSTABLE BALL BAR LENGTH, 600 MM, 23.62 INCHES | $121.00 | |
| ABB-800 | 31.496" | 800 mm | ADJUSTABLE BALL BAR LENGTH, 800 MM, 31.496 INCHES | $123.00 | |
| ABB-INV-50 | 1.969" | 50 mm | ADJUSTABLE BALL BAR LENGTH, INVAR®, 050 MM, 1.968 INCHES | $176.00 | |
| ABB-INV-100 | 3.937" | 100 mm | ADJUSTABLE BALL BAR LENGTH, INVAR®, 100 MM, 3.937 INCHES | $219.00 | |
| ABB-INV-200 | 7.874" | 200 mm | ADJUSTABLE BALL BAR LENGTH, INVAR®, 200 MM, 7.874 INCHES | $225.00 | |
| ABB-INV-400 | 15.748" | 400 mm | ADJUSTABLE BALL BAR LENGTH, INVAR®, 400 MM, 15.748 INCHES | $230.00 | |
| ABB-INV-600 | 23.622" | 600 mm | ADJUSTABLE BALL BAR LENGTH, INVAR®, 600 MM, 23.62 INCHES | $231.00 | |
| ABB-INV-800 | 31.496" | 800 mm | ADJUSTABLE BALL BAR LENGTH, INVAR®, 800 MM, 31.496 INCHES | $233.00 | |
| ABB-INV-K | ADJUSTABLE BALL BAR KIT, INVAR® | $1617.00 | |
||
| ABB-PIN | ADJUSTABLE BALL BAR PIN | $19.25 | |
||
| ABB-PB-100 | 1" (Sphere Diameter) |
25.4 mm | POST MOUNTED SPHERE FOR ADJUSTABLE BALL BAR | $219.00 | |
| ABB-UP-100 | SPHERE AND CYLINDER | $301.00 | |
||
| ABB-K | ADJUSTABLE BALL BAR KIT, EIGHT PIECES | $1133.00 | |
||
| ABB-K-CASE | ADJUSTABLE BALL BAR KIT, STEEL WITH CASE | $1463.00 | |
||
| ABB-CASE | ADJUSTABLE BALL BAR CASE, RIGID PLASTIC | $330.00 | |
||
| ABB-INV-K-CASE | ADJUSTABLE BALL BAR KIT, INVAR®, WITH CASE | $1947.00 | |
Anchor
The Anchor supports Ball Bars (Dumbbells) for
Coordinate Measuring Machine evaluation. It is much
shorter and lighter than the heavy duty stand. The Anchor
is a 3" (7.6 cm) diameter steel tube and can be directly
tied together to produce different lengths. It is
standardly used with a Collar and one Ball Bar
(Dumbbell). Probe Spheres and accessories can be
tied on the top of the Anchor. The Crown and Adaptor
Screws are used with the Anchors.
See: Tech Data Sheet:
CMM-l3 -Pg 2.
| Part # | Description | Price | Purchase |
|---|---|---|---|
| AN-4 | ANCHOR WITH COLLAR AND FS-1BB 101.6 MM, 4 INCHES | $585.00 | |
| AN-8 | ANCHOR WITH COLLAR AND FS-1BB 203.2 MM, 8 INCHES | $585.00 | |
| AN-12 | ANCHOR WITH COLLAR AND FS-1BB 304.8 MM, 12 INCHES | $617.00 | |
| AN-24 | ANCHOR WITH COLLAR AND FS-1BB 609.6 MM, 24 INCHES | $656.00 | |
| AN-4-0 | ANCHOR ONLY 101.6 MM, 4 INCHES | $311.00 | |
| AN-8-0 | ANCHOR ONLY 203.2 MM, 8 INCHES | $278.00 | |
| AN-12-0 | ANCHOR ONLY 304.8 MM, 12 INCHES | $343.00 | |
| AN-24-0 | ANCHOR ONLY 609.6 MM, 24 INCHES | $382.00 | |
| AN-CR | CROWN FOR ANCHOR | $181.00 | |
The Ball Bar (Dumbbell) Stand
The Ball Bar (Dumbbell)
Stand: The Ball Bar (Dumbbell) Stand is a rugged easy to use
device. It rigidly holds the Ball Bar (Dumbbell) for
fast accurate Coordinate Measuring Machine evaluation.
The base is cast iron and it weighs 25 pounds (11.34
kg). The vertical post is 2 inches in diameter. The
Collar wraps around the post and the Ball Bar
(Dumbbell) Clamp attaches to it. The stand also
includes a hold down device for tying it to the C. M.
M. table.
See: Tech Data Sheet:
CMM-2.
| Part # | Description | Price | Purchase |
|---|---|---|---|
| FS-10M | STAND TIE DOWN | $62.57 | |
| FS-14 | BALL BAR STAND 355.6 MM, 14 INCHES, INCLUDES A SINGLE CLAMP, COLLAR | $628.00 | |
| FS-14-0 | BALL BAR STAND ONLY, 355.6 MM, 14 INCHES | $381.00 | |
| FS-14-3-6 | BALL BAR KIT, INCLUDES 300 MM AND 600 MM BALL BARS, STAND, A COLLAR AND DUAL CLAMP | $1367.00 | |
| FS-1BB | SINGLE BALL BAR CLAMP | $151.00 | |
| FS-1BB-S | SMALL BALL BAR CLAMP | $151.00 | |
| FS-24 | BALL BAR STAND 609.6 MM, 24 INCHES, INCLUDES A SINGLE CLAMP, A COLLAR AND A TIE DOWN | $650.00 | |
| FS-24-0 | BALL BAR STAND ONLY, 609.6 MM, 24 INCHES | $401.00 | |
| FS-2BB | DUAL BALL BAR CLAMP | $180.00 | |
| FS-3 | TRI-MOUNT COLLAR, 2 INCH DIAMETER THROUGH HOLE, FOR HEAVY DUTY STAND | $273.00 | |
| FS-36 | BALL BAR STAND 914.4 MM, 36 INCHES, INCLUDES A SINGLE CLAMP, A COLLAR AND A TIE DOWN | $683.00 | |
| FS-36-0 | BALL BAR STAND ONLY, 914.4 MM, 36 INCHES | $488.00 | |
| FS-3BB | TRI-MOUNT COLLAR AND THREE SINGLE BALL BAR CLAMPS | $604.00 | |
| FS-KIT-750 | PRE LOAD KIT FOR MECHANICAL CLAMPING | $377.00 | |
| FS-WB | WASHER AND SHOULDER BOLT | $10.80 | |
Note that the stand kits include: Stand, Collar, Single Ball Bar (Dumbbell) Clamp & Tie-down fixture.
Ball Gages
Ball Gages are manufactured
in a wide variety of designs for all inspection
applications. Some are as simple as a loose ball, and
others are balls mounted on stems. Go and No-Go ball
gages are made to order in any size, with or without
handles.
For pricing and details please see: Ball Gage Catalog
Balls for Ball Sizing
Balls for Ball Sizing is the
process of forcing an oversized ball through the inside
diameter of a metal part. It will increase the inside
diameter and greatly improve the surface texture of the
part. It is commonly used to assure an inside diameter size
in elbows of tubing.
See: Report on Ball
Sizing
See: Sapphire Oil
Balwands
Balwands consist of a ball with
a flatted area, mounted on a shaft. They are used to
measure the distance or gap between two surfaces. They
are excellent for measuring the flatness of large
parts. Two Balwands of the proper diameters
create a go and no-go situation.
See: Tech Data Sheet: #17 & Ball Gage Catalog.
The Big One
The Big One is a giant 2 inch
diameter target sphere used for probe
characterization and to evaluate the performance
of C. M. M. or C. N. C. Machining Centers.
See: Tech Data Sheet CNC-1
| Part # | Description | Price | Purchase |
|---|---|---|---|
| BO-EP-3 | BIG ONE, EXTENSION 3 INCHES, 2" DIAMETER | $37.40 | |
| BO-EP-6 | BIG ONE, EXTENSION 6 INCHES, 2" DIAMETER | $40.70 | |
| BO-PM-B200 | BIG ONE, THE, 50.8 MM, 2 INCHES, 2.5 INCH POST | $431.00 | |
| BO-PM-SAT-B200 | BIG ONE, THE, SATIN FINISHED 50.8 MM, 2 INCHES, 2.5 INCH POST | $431.00 | |
The Bluing Master
The Bluing Masteris
used for checking spherical and toroidal
surfaces. This is usually a textured ball on a
Stem. The ball contact with the test part is
shown by a thin coating of oil base Prussian Blue
applied to the ball.
For prices and more information see: Tech Data Sheet: #16 & Ball Gage Catalog.
Ball Quality Chart - A.F.B.M.A. Grade Chart
Bal-tec's Ball Quality Chart — A.F.B.M.A. Grade Chart: Printed on a sturdy 8 1/2 x 11 inch plastic card with a Decimal Equivalent Chart on the reverse side. All of the variables used to determine the quality of a given ball grade are clearly defined by this ready reference chart.
Available free of charge. Call (800) 322-5832 or e-mail us: info@precisionballs.com
You may also have a look on our online chart or download it as pdf.
Calibration Spheres, Precise and Ultra Precise
Precise and Ultra Precise Calibration
Spheres are supplied so customers can
build their own devices for calibration and
inspection applications. Three sphere types are
available: polished solid sphere, the sphere with a
hole or the sphere with a satin finish (usually for
vision systems). The UB series is Ultra Precise,
the PB series is Precise, and the SAT items are
Satin Finished.
See: Technical Data
Sheet CMM-8
For prices, see: All Characterization Spheres
The Cantilever Ball Bar (Dumbbell)
The Cantilever Ball Bar
(Dumbbell) is the
most advanced Ball Bar (Dumbbell) designed. It has
two additional spheres located just behind each
master sphere. This second set of spheres are used as
a means to rigidly support the Ball Bar (Dumbbell)
near the ends. This support virtually eliminates any
bending due to the contact force of the measuring
probe. The Cantilevered Ball Bar (Dumbbell) is used
with the Way Out Ball Bar (Dumbbell) Support.
See: Technical Data
Sheet CMM-16 Page 1
Cantilever Ball Bar Pricing, Steel
| Part # | Description | Price | Purchase |
|---|---|---|---|
| CUP-BB-200 | BALL BAR, CANTILEVER, STEEL, 0200 MM, 7.874 INCHES | $652.00 | |
| CUP-BB-300 | BALL BAR, CANTILEVER, STEEL, 0300 MM, 11.8 INCHES | $652.00 | |
| CUP-BB-350 | BALL BAR, CANTILEVER, STEEL, 0350 MM, 13.779 INCHES | $664.00 | |
| CUP-BB-400 | BALL BAR, CANTILEVER, STEEL, 0400 MM, 15.748 INCHES | $675.00 | |
| CUP-BB-450 | BALL BAR, CANTILEVER, STEEL, 0450 MM, 17.7 INCHES | $688.00 | |
| CUP-BB-500 | BALL BAR, CANTILEVER, STEEL, 0500 MM, 19.685 INCHES | $688.00 | |
| CUP-BB-550 | BALL BAR, CANTILEVER, STEEL, 0550 MM, 21.653 INCHES | $699.00 | |
| CUP-BB-600 | BALL BAR, CANTILEVER, STEEL, 0600 MM, 23.622 INCHES | $699.00 | |
| CUP-BB-650 | BALL BAR, CANTILEVER, STEEL, 0650 MM, 25.59 INCHES | $722.00 | |
| CUP-BB-700 | BALL BAR, CANTILEVER, STEEL, 0700 MM, 27.559 INCHES | $722.00 | |
| CUP-BB-750 | BALL BAR, CANTILEVER, STEEL, 0750 MM, 29.528 INCHES | $734.00 | |
| CUP-BB-800 | BALL BAR, CANTILEVER, STEEL, 0800 MM, 31.496 INCHES | $734.00 | |
| CUP-BB-850 | BALL BAR, CANTILEVER, STEEL, 0850 MM, 33.464 INCHES | $746.00 | |
| CUP-BB-900 | BALL BAR, CANTILEVER, STEEL, 0900 MM, 35.433 INCHES | $746.00 | |
| CUP-BB-950 | BALL BAR, CANTILEVER, STEEL, 0950 MM, 37.401 INCHES | $769.00 | |
| CUP-BB-1000 | BALL BAR, CANTILEVER, STEEL, 1000 MM, 39.37 INCHES | $769.00 | |
Cantilever Ball Bar Pricing, Invar
| Part # | Description | Price | Purchase |
|---|---|---|---|
| CUP-BB-INV-200 | BALL BAR, CANTILEVER, INVAR®, 0200 MM, 7.874 INCHES | $782.00 | |
| CUP-BB-INV-300 | BALL BAR, CANTILEVER, INVAR®, 0300 MM, 11.8 INCHES | $782.00 | |
| CUP-BB-INV-350 | BALL BAR, CANTILEVER, INVAR®, 0350 MM, 13.779 INCHES | $794.00 | |
| CUP-BB-INV-400 | BALL BAR, CANTILEVER, INVAR®, 0400 MM, 15.748 INCHES | $805.00 | |
| CUP-BB-INV-450 | BALL BAR, CANTILEVER, INVAR®, 0450 MM, 17.7 INCHES | $816.00 | |
| CUP-BB-INV-500 | BALL BAR, CANTILEVER, INVAR®, 0500 MM, 19.685 INCHES | $816.00 | |
| CUP-BB-INV-550 | BALL BAR, CANTILEVER, INVAR®, 0550 MM, 21.653 INCHES | $828.00 | |
| CUP-BB-INV-600 | BALL BAR, CANTILEVER, INVAR®, 0600 MM, 23.622 INCHES | $828.00 | |
| CUP-BB-INV-650 | BALL BAR, CANTILEVER, INVAR®, 0650 MM, 25.59 INCHES | $828.00 | |
| CUP-BB-INV-700 | BALL BAR, CANTILEVER, INVAR®, 0700 MM, 27.559 INCHES | $851.00 | |
| CUP-BB-INV-750 | BALL BAR, CANTILEVER, INVAR®, 0750 MM, 29.528 INCHES | $864.00 | |
| CUP-BB-INV-800 | BALL BAR, CANTILEVER, INVAR®, 0800 MM, 31.496 INCHES | $864.00 | |
| CUP-BB-INV-850 | BALL BAR, CANTILEVER, INVAR®, 0850 MM, 33.464 INCHES | $864.00 | |
| CUP-BB-INV-900 | BALL BAR, CANTILEVER, INVAR®, 0900 MM, 35.433 INCHES | $898.00 | |
| CUP-BB-INV-950 | BALL BAR, CANTILEVER, INVAR®, 0950 MM, 37.401 INCHES | $898.00 | |
| CUP-BB-INV-1000 | BALL BAR, CANTILEVER, INVAR®, 1000 MM, 39.37 INCHES | $898.00 | |
Custom Precision Balls
Custom Precision Balls
are made in any size, any material, any quality,
any quantity and for any application. To
determine the quality of the ball, refer to our
reprint of the A.F.B.M.A. Grade Chart. We offer
same day shipment of over 40,000 stock items and
same week delivery on most custom made
orders.
See: Orange Brochure
See: A.F.B.M.A. Grade Chart
*Available free of charge. Call (800) 322-5832
Dimensional Measuring Lab
Gleco Division's dimensional
measuring lab provides certification
traceable to (NIST) National Institute of
Standards & Technology. The temperature is
controlled at the International standard of 68
degrees Fahrenheit or 20 degrees Celsius. A
clean room environment is being developed for
even tighter controls. The size of the ball is
measured between two parallel flats using state
of the art methods with a Heidenhain certo
scale.
See: Technical Data Sheets 13, 14 & 15
| Part # | Description | Price | Purchase |
|---|---|---|---|
| INSP1 | SIZE AND ROUNDNESS CALIBRATION, ONE BALL | $65.00 | |
| INSPBB | SIZE AND ROUNDNESS CALIBRATION, ONE BALL BAR | $130.00 | |
Dual Ended Threaded Adaptor Screws
Dual Ended Threaded
Adaptor Screws
are available in a full array of sizes. Any
Coordinate Measuring Machines component can be
attached to any C. M. M. table or pallet system
with these screws. A slot is provided for
tightening.
For more information and pricing see: Technical Data Sheet Standard Threaded Adaptor
The Free Standing Ball Bar (Dumbbell) Kit
The Free Standing Ball Bar (Dumbbell) Kit
is an excellent interim test device. It is used
to give the entire Coordinate Measuring Machine a
good evaluation between complete calibrations.
The kit includes two Standard Ball Bars, (300 mm
and 600 mm), the collar, a double Ball Bar
(Dumbbell) Clamp, stand tie-down fixture and a
robust stand.
See: Tech Data Sheet: CMM-2a
| Part # | Description | Price | Purchase |
|---|---|---|---|
| FS-10M | STAND TIE DOWN | $62.57 | |
| FS-14 | BALL BAR STAND 355.6 MM, 14 INCHES, INCLUDES A SINGLE CLAMP, COLLAR | $628.00 | |
| FS-14-0 | BALL BAR STAND ONLY, 355.6 MM, 14 INCHES | $381.00 | |
| FS-14-3-6 | BALL BAR KIT, INCLUDES 300 MM AND 600 MM BALL BARS, STAND, A COLLAR AND DUAL CLAMP | $1367.00 | |
| FS-1BB | SINGLE BALL BAR CLAMP | $151.00 | |
| FS-1BB-S | SMALL BALL BAR CLAMP | $151.00 | |
| FS-24 | BALL BAR STAND 609.6 MM, 24 INCHES, INCLUDES A SINGLE CLAMP, A COLLAR AND A TIE DOWN | $650.00 | |
| FS-24-0 | BALL BAR STAND ONLY, 609.6 MM, 24 INCHES | $401.00 | |
| FS-2BB | DUAL BALL BAR CLAMP | $180.00 | |
| FS-3 | TRI-MOUNT COLLAR, 2 INCH DIAMETER THROUGH HOLE, FOR HEAVY DUTY STAND | $273.00 | |
| FS-36 | BALL BAR STAND 914.4 MM, 36 INCHES, INCLUDES A SINGLE CLAMP, A COLLAR AND A TIE DOWN | $683.00 | |
| FS-36-0 | BALL BAR STAND ONLY, 914.4 MM, 36 INCHES | $488.00 | |
| FS-3BB | TRI-MOUNT COLLAR AND THREE SINGLE BALL BAR CLAMPS | $604.00 | |
| FS-KIT-750 | PRE LOAD KIT FOR MECHANICAL CLAMPING | $377.00 | |
| FS-WB | WASHER AND SHOULDER BOLT | $10.80 | |
*Note that the stand kits include: Stand, Collar, Single Ball Bar (Dumbbell) Clamp & Tie-down fixture.
Inspection Ball Kits
Inspection Ball Kits are available from stock in
the 14 most popular English sizes from 3/32" to
1.00", individually or all in a kit. Each
individual group of balls contain a
nominal fractional ball as well as one
each of a +.002", +001",
+0005", +0002", and -.001",
-002". The inspection ball kits are also
excellent for ball sizing parts. Ball sizing is
basically pushing a ball through a hole or tube
which produce a certain finish or size.
See: Tech Data Sheet: BG-7& 8
| Part # | Nominal Size | Price | Purchase | |
|---|---|---|---|---|
| BK-14 | Ball Kit | 14 Sizes | $492.00 | |
| 093-BK | 3/32" | 2.381 mm | $30.92 | |
| 125-BK | 1/8" | 3.175 mm | $30.92 | |
| 156-BK | 5/32" | 3.969 mm | $30.92 | |
| 187-BK | 3/16" | 4.763 mm | $30.92 | |
| 218-BK | 7/32" | 5.556 mm | $30.92 | |
| 250-BK | 1/4" | 6.35 mm | $30.92 | |
| 312-BK | 5/16" | 7.938 mm | $32.22 | |
| 375-BK | 3/8" | 9.525 mm | $33.52 | |
| 437-BK | 7/16" | 11.113 mm | $33.52 | |
| 500-BK | 1/2" | 12.7 mm | $37.39 | |
| 625-BK | 5/8" | 15.875 mm | $37.39 | |
| 750-BK | 3/4" | 19.05 mm | $43.86 | |
| 875-BK | 7/8" | 22.225 mm | $51.60 | |
| 100-BK | 1" | 25.4 mm | $51.60 | |
| SA-OIL-PT | 1 Pint Sapphire Oil | 473.18 ml | $19.80 | |
| SA-OIL-GA | 1 Gallon Sapphire Oil | 3.785 Liters | $60.50 | |
Large Diameter and Really Big Balls
Produced to order. We make large precision Balls,
some to over 20 inches in diameter. Let us quote
your next Big Ball requirement.
Tech Data Sheet: We Grind Giant Balls
Also: Big Ball Inventory
| Finish | Size Tolerance |
|---|---|
| Machined Only | ± .005 |
| Ground Only | ± .002 |
| Ground & Polished | ± .0005 |
| Ground, Lapped & Polished | ± .0001 |
Large Magnetic Platform
The Large Magnetic Platform is 4 inches in
diameter and is used to magnetically couple a
variety of C. M. M. devices and C. N. C. to
machine tables.
See: Tech Data Sheet: CNC-2
| Part # | Description | Price | Purchase |
|---|---|---|---|
| M-PLT-4 | PLATFORM, MAGNETIC, 4" ( 101.6 MM ) DIAMETER, 1.5" ( 38.1 MM ) THICK | $326.00 | |
Microinch Positioning with Kinematic Components
Microinch Positioning with Kinematic
Components is explained in this
brochure. We stock precision balls and cylinders
in many different designs for use as Kinematics
which is the most accurate method of joining two
mechanical elements.
See:
Technical Data Sheets Kin 1-10
Bal-tec Kinematic Components Catalog and Price List
Complete Ball Pricing
See: our catalog
| Part # | Price | Purchase |
|---|---|---|
| 187-B | $7.50 | |
| 250-B | $7.50 | |
| 312-B | $7.50 | |
| 375-B | $7.50 | |
| 500-B | $7.50 | |
| 750-B | $10.95 | |
| 100-B | $13.81 | |
Truncated Ball Pricing
See: our catalog
| Part # | Price | Purchase |
|---|---|---|
| 187-TB | $12.87 | |
| 250-TB | $13.53 | |
| 312-TB | $13.75 | |
| 375-TB | $14.30 | |
| 500-TB | $14.85 | |
| 750-TB | $18.32 | |
| 100-TB | $23.38 | |
Truncated and Recessed Ball Pricing
See: our catalog
| Part # | Price | Purchase |
|---|---|---|
| 187-TBR | $17.38 | |
| 250-TBR | $17.38 | |
| 312-TBR | $17.60 | |
| 375-TBR | $18.15 | |
| 500-TBR | $19.80 | |
| 750-TBR | $22.17 | |
| 100-TBR | $26.13 | |
Truncated and Threaded Ball Pricing
See: our catalog
| Part # | Price | Purchase |
|---|---|---|
| 250-TBR-T | $36.30 | |
| 312-TBR-T | $36.30 | |
| 375-TBR-T | $35.20 | |
| 500-TBR-T | $35.20 | |
| 750-TBR-T | $35.20 | |
| 100-TBR-T | $38.50 | |
Truncated Ball with Counterbored Hole Pricing
See: our catalog
| Part # | Price | Purchase |
|---|---|---|
| 250-TBR-CB | $38.50 | |
| 312-TBR-CB | $38.50 | |
| 375-TBR-CB | $38.50 | |
| 500-TBR-CB | $38.50 | |
| 750-TBR-CB | $42.90 | |
| $0.00 | |
Full Ball with Counterbore Pricing
See: our catalog
| Part # | Price | Purchase | |||
|---|---|---|---|---|---|
| 250-B-CB | $29.54 | $25.85 | $24.85 | $23.00 | |
| 312-B-CB | $29.54 | $25.85 | $24.85 | $23.00 | |
| 375-B-CB | $30.69 | $26.82 | $26.32 | $26.00 | |
| 500-B-CB | $30.69 | $26.80 | $26.30 | $26.00 | |
| 750-B-CB | $31.63 | $28.45 | $27.70 | $27.20 | |
| 100-B-CB | $42.90 | $37.90 | $36.73 | $36.00 | |
Ball with Blind Hole Pricing
See: our catalog
| Part # | Price | Purchase | |||
|---|---|---|---|---|---|
| 187-BBH | $18.70 | $16.68 | $16.60 | $16.50 | |
| 250-BBH | $18.81 | $16.68 | $16.60 | $16.50 | |
| 312-BBH | $19.03 | $16.84 | $16.75 | $16.65 | |
| 375-BBH | $20.35 | $17.80 | $17.68 | $17.53 | |
| 500-BBH | $23.65 | $19.50 | $19.46 | $19.30 | |
| 750-BBH | $24.88 | $22.70 | $22.30 | $22.00 | |
| 100-BBH | $29.98 | $24.90 | $24.30 | $23.90 | |
Truncated Ball with Blind Hole Pricing
See: our catalog
| Part # | Price | Purchase |
|---|---|---|
| 187-TB-BH | $19.47 | |
| 250-TB-BH | $19.58 | |
| 312-TB-BH | $20.13 | |
| 375-TB-BH | $31.35 | |
| 500-TB-BH | $23.87 | |
| 750-TB-BH | $28.60 | |
| 100-TB-BH | $30.47 | |
Lotus Wrench Pricing
See: our catalog
| Part # | Description | Price | Purchase |
|---|---|---|---|
| 250-LW | LOTUS WRENCH, 0.2500", ( 1/4" ), 6.350 MM | $60.50 | |
| 312-LW | LOTUS WRENCH, 0.3125", ( 5/16" ), 7.937 MM | $60.50 | |
| 375-LW | LOTUS WRENCH, 0.3750", ( 3/8" ), 9.525 MM | $60.50 | |
| 50-LW | LOTUS WRENCH, 0.5000", ( 1/2" ), 12.700 MM | $60.50 | |
| 75-LW | LOTUS WRENCH, 0.7500", ( 3/4" ), 19.05 MM | $71.50 | |
| 100-LW | LOTUS WRENCH, 1.0000", ( 1" ), 25.400 MM | $93.50 | |
Truncated Cylinder Pricing
See: our catalog
| Part # | Price | Purchase |
|---|---|---|
| 187-TC | $14.58 | |
| 250-TC | $14.58 | |
| 312-TC | $15.07 | |
| 375-TC | $15.90 | |
| 500-TC | $17.55 | |
| 750-TC | $27.17 | |
| 100-TC | $32.56 | |
Truncated and Recessed Cylinder Pricing
See: our catalog
| Part # | Price | Purchase |
|---|---|---|
| 187-TCR | $16.78 | |
| 250-TCR | $16.78 | |
| 312-TCR | $17.27 | |
| 375-TCR | $18.10 | |
| 500-TCR | $19.36 | |
| 750-TCR | $31.57 | |
| 100-TCR | $35.86 | |
Truncated and Threaded Cylinder Pricing
See: our catalog
| Part # | Price | Purchase |
|---|---|---|
| 250-TCR-T | $40.37 | |
| 312-TCR-T | $40.37 | |
| 375-TCR-T | $41.20 | |
| 500-TCR-T | $43.12 | |
| 750-TCR-T | $45.38 | |
| 100-TCR-T | $47.96 | |
Truncated Cylinder with Counterbored Hole Pricing
See: our catalog
| Part # | Price | Purchase |
|---|---|---|
| 250-TCR-CB | $41.69 | |
| 312-TCR-CB | $41.69 | |
| 375-TCR-CB | $42.35 | |
| 500-TCR-CB | $52.69 | |
| 750-TCR-CB | $53.79 | |
| 100-TCR-CB | $69.96 | |
Truncated Cylinder with Blind Holes Pricing
See: our catalog
| Part # | Price | Purchase |
|---|---|---|
| 187-TC-BH | $21.18 | |
| 250-TC-BH | $21.18 | |
| 312-TC-BH | $22.22 | |
| 375-TC-BH | $23.60 | |
| 500-TC-BH | $25.96 | |
| 750-TC-BH | $37.07 | |
| 100-TC-BH | $44.00 | |
Vee Blocks Pricing -- See also Vee Block
See: our catalog
| Part # | Description | Price | Purchase |
|---|---|---|---|
| VB-5 | ROUGH ALUMINUM VEE BLOCK CASTING | $129.00 | |
| VB-187-CPM | VEE BLOCK, 0.1875" ( 3/16" ), CYLINDRICAL POST MOUNTED | $50.60 | |
| VB-375-CPM | VEE BLOCK, 0.375" ( 3/8") CYLINDRICAL POST MOUNTED | $50.60 | |
| VB-375-SM | VEE BLOCK, 0.375" ( 3/8") SURFACE MOUNTED | $50.60 | |
| VB-75-CPM | VEE BLOCK, 0.750" ( 3/4" ), CYLINDRICAL POST MOUNTED | $50.60 | |
| VB-75-SM | VEE BLOCK, 0.750" ( 3/4" ), SURFACE MOUNTED | $50.60 | |
| VB-2000-CPM | VEE BLOCK, 2" CYLINDRICAL POST MOUNTED | $173.00 | |
| VB-2000-SM | VEE BLOCK, 2" SURFACE MOUNTED | $173.00 | |
Threaded Cylinder Pricing
See: our catalog
| Part # | Price | Purchase |
|---|---|---|
| 250-C-T | $33.77 | |
| 312-C-T | $33.77 | |
| 375-C-T | $34.60 | |
| 500-C-T | $36.96 | |
| 750-C-T | $38.78 | |
| 100-C-T | $41.36 | |
The Mini Ball Bar (Dumbbell)
The Mini Ball Bar solves many problems
associated with characterizing C.M.M. probes that are
inclined, horizontal or of compound i.e. star
design.
Technical Data Sheet: CMM-9.
| Part # | Description | Price | Purchase |
|---|---|---|---|
| MBB-39 | MINI BALL BAR, 10 MM, 0.3937 INCHES | $498.00 | |
| MBB-50 | MINI BALL BAR, 12.7 MM, 0.5 INCHES | $498.00 | |
| MBB-75 | MINI BALL BAR, 19.05 MM, 0.75 INCHES | $498.00 | |
| MBB-100 | MINI BALL BAR, 25.4 MM, 1 INCHES | $498.00 | |
Modified Balls
Modified Balls of almost any configuration
are manufactured in our Los Angeles facility. Our
facility includes complete E. D. M. (Electrical
Discharge Machining), conventional machining and
grinding capabilities. Balls with flats, holes,
threads, or with stems brazed, welded, glued,
screwed or riveted can be produced. Pricing
available per your print, drawing or
description.
See: Tech Data Sheets:
#12
Call (800) 322-5832 for a quote
Precision Kinematic and Tooling Components
Precision Kinematic and Tooling Components
are used as the elements to precisely locate
devices in tooling, inspection and
instrumentation applications. Kinematically
Mounted parts can be removed and replaced with
almost perfect repeatability. A wide variety of
Balls, Cylinders, Flats, Vees, Cones, and other
geometries are available. They can be screwed,
staked, pressed or glued into position.
See: Catalog
#105-A
Probe Characterizing Spheres
Probe Characterizing Spheres are used to
evaluate and determine compensation needed for
errors in C.M.M. measuring probes. Most errors
and problems on C.M.M.'s are in the probe. This
should be the first measuring device purchased to
check the C.M.M.
See: Technical
Data Sheet: CMM-7.
The Quick Grip Stand
The Quick Grip Stand is used to reduce the
Ball Bar (Dumbbell) positioning time and the
number of measurements required while providing
rigid kinematic support of the Ultra Precise Ball
Bar (Dumbbell) during evaluation of Coordinate
Measuring Machines. Includes a Freestanding
Stand, Quick Grip Collar, Two Ball Kinematic
Mount and Three Ball Kinematic Mount.
See: Tech Data Sheet:
CMM-6.
| Part # | Imperial Size | Metric Size | Description | Price | Purchase |
|---|---|---|---|---|---|
| QG-1 | QUICK GRIP WITHOUT STAND | $303.00 | |
||
| QG-24 | 24" | 609.6 mm | QUICK GRIP, 609.6 MM, 24 INCHES, STAND, 2B-KM AND 3B-KM ( TWO AND THREE BALL KINEMATIC MOUNT ) | $831.00 | |
| QG-36 | 36" | 914.4 mm | QUICK GRIP, 914.4 MM, 36 INCHES, STAND, 2B-KM AND 3B-KM ( TWO AND THREE BALL KINEMATIC MOUNT ) | $769.00 | |
| QG-14-0 | 14" | 355.6 mm | 14 INCH QUICK GRIP STAND | $453.00 | |
| QG-24-0 | 24" | 609.6 mm | 24 INCH QUICK GRIP STAND | $467.00 | |
Roundness Master Calibration Spheres
Roundness Master Calibration Spheres for
calibration of roundness measuring machines are
available with high quality long wearing tungsten
carbide spheres. The .500 inch (12.7mm) sphere is
round to less than 2.5 microinches (50.8 nary).
This flange mounted master sphere can be used on
all roundness measuring machines.
See: Technical
Data Sheet AUT-6
Sapphire Oil
Sapphire Oil is a used as a lubricant when Ball Sizing. For heavy upsets or when a better finish is required this highly chlorinated oil or wax is the best choice. It is about a forty weight oil that is easily applied to any bore.
See: Balls for Ball Sizing
Also: Report on Ball Sizing
| Part # | Description | Price | Purchase |
|---|---|---|---|
| SA-OIL-PT | SAPPHIRE OIL, PINT | $19.80 | |
| SA-OIL-GA | SAPPHIRE OIL, GALLON | $60.50 | |
Sphericity
Sphericity - Measuring the roundness of a
ball is no problem using the Talyrond system. This
system is our fastest and most accurate method of
measuring roundness. The ball being inspected
remains at rest on the table while the test probe
is rotated accurately around it. A permanent polar
chart recording is produced. The overall accuracy
of this machine is one millionth of an inch. The
calibration is verified by standards traceable to
the National
Institute of Standards and Technology
(NIST).
See: Technical Data
#15
The Standard Ball Bar (Dumbbell)
The Standard Ball Bar (Dumbbell) is a gage
device which is used to evaluate the overall
performance of Coordinate Measuring Machines. The
Ball Bar consists of two very precise spheres firmly
attached to opposite ends of a rather long rigid bar.
1 inch (25.4 mm) balls are Hardened Stainless Steel,
58RC. They are matched in size and spherical within 5
microinches (127 nm). Available in many different
lengths. Most commonly used with the standard Ball
Bar (Dumbbell) Stand or as part of the Ball Bar
(Dumbbell) Kit.
See: Tech Data Sheet
CMM-1 Page 1& 2.
Standard Ball Bar Pricing, Steel
| Part # | Description | Price | Purchase |
|---|---|---|---|
| PBB-100 | BALL BAR, PRECISION, STEEL 0100 MM, 3.937 INCHES | $363.00 | |
| PBB-200 | BALL BAR, PRECISION, STEEL 0200 MM, 7.874 INCHES | $429.00 | |
| PBB-300 | BALL BAR, PRECISION, STEEL 0300 MM, 11.8 INCHES | $435.00 | |
| PBB-350 | BALL BAR, PRECISION, STEEL 0350 MM, 13.779 INCHES | $435.00 | |
| PBB-400 | BALL BAR, PRECISION, STEEL 0400 MM, 15.748 INCHES | $447.00 | |
| PBB-450 | BALL BAR, PRECISION, STEEL 0450 MM, 17.7 INCHES | $425.00 | |
| PBB-500 | BALL BAR, PRECISION, STEEL 0500 MM, 19.685 INCHES | $425.00 | |
| PBB-550 | BALL BAR, PRECISION, STEEL 0550 MM, 21.653 INCHES | $428.00 | |
| PBB-600 | BALL BAR, PRECISION, STEEL 0600 MM, 23.622 INCHES | $437.00 | |
| PBB-650 | BALL BAR, PRECISION, STEEL 0650 MM, 25.59 INCHES | $437.00 | |
| PBB-700 | BALL BAR, PRECISION, STEEL 0700 MM, 27.559 INCHES | $439.00 | |
| PBB-750 | BALL BAR, PRECISION, STEEL 0750 MM, 29.528 INCHES | $439.00 | |
| PBB-800 | BALL BAR, PRECISION, STEEL 0800 MM, 31.496 INCHES | $453.00 | |
| PBB-850 | BALL BAR, PRECISION, STEEL 0850 MM, 33.464 INCHES | $457.00 | |
| PBB-900 | BALL BAR, PRECISION, STEEL 0900 MM, 35.433 INCHES | $457.00 | |
| PBB-950 | BALL BAR, PRECISION, STEEL 0950 MM, 37.401 INCHES | $465.00 | |
| PBB-1000 | BALL BAR, PRECISION, STEEL 1000 MM, 39.37 INCHES | $465.00 | |
| PBB-1100 | BALL BAR, PRECISION, STEEL 1100 MM, 43.307 INCHES | $594.00 | |
| PBB-1600 | BALL BAR, PRECISION, STEEL 1600 MM, 62.992 INCHES | $636.00 | |
Standard Ball Bar Pricing, Invar
| Part # | Description | Price | Purchase |
|---|---|---|---|
| PBB-INV-100 | BALL BAR, PRECISION, INVAR® 0100 MM, 3.937 INCHES | $473.00 | |
| PBB-INV-200 | BALL BAR, PRECISION, INVAR® 0200 MM, 7.874 INCHES | $517.00 | |
| PBB-INV-300 | BALL BAR, PRECISION, INVAR® 0300 MM, 11.8 INCHES | $523.00 | |
| PBB-INV-350 | BALL BAR, PRECISION, INVAR® 0350 MM, 13.779 INCHES | $523.00 | |
| PBB-INV-400 | BALL BAR, PRECISION, INVAR® 0400 MM, 15.748 INCHES | $535.00 | |
| PBB-INV-450 | BALL BAR, PRECISION, INVAR® 0450 MM, 17.7 INCHES | $535.00 | |
| PBB-INV-500 | BALL BAR, PRECISION, INVAR® 0500 MM, 19.685 INCHES | $538.00 | |
| PBB-INV-550 | BALL BAR, PRECISION, INVAR® 0550 MM, 21.653 INCHES | $538.00 | |
| PBB-INV-600 | BALL BAR, PRECISION, INVAR® 0600 MM, 23.622 INCHES | $547.00 | |
| PBB-INV-650 | BALL BAR, PRECISION, INVAR® 0650 MM, 25.59 INCHES | $547.00 | |
| PBB-INV-700 | BALL BAR, PRECISION, INVAR® 0700 MM, 27.559 INCHES | $551.00 | |
| PBB-INV-750 | BALL BAR, PRECISION, INVAR® 0750 MM, 29.528 INCHES | $551.00 | |
| PBB-INV-800 | BALL BAR, PRECISION, INVAR® 0800 MM, 31.496 INCHES | $628.00 | |
| PBB-INV-850 | BALL BAR, PRECISION, INVAR® 0850 MM, 33.464 INCHES | $580.00 | |
| PBB-INV-900 | BALL BAR, PRECISION, INVAR® 0900 MM, 35.433 INCHES | $580.00 | |
| PBB-INV-950 | BALL BAR, PRECISION, INVAR® 0950 MM, 37.401 INCHES | $594.00 | |
| PBB-INV-1000 | BALL BAR, PRECISION, INVAR® 1000 MM, 39.37 INCHES | $594.00 | |
| PBB-INV-1100 | BALL BAR, PRECISION, INVAR® 1100 MM, 43.307 INCHES | $594.00 | |
| PBB-INV-1600 | BALL BAR, PRECISION, INVAR® 1600 MM, 62.992 INCHES | $636.00 | |
Standard Commercial Balls
We carry a large inventory of standard English and
metric ball sizes. This inventory includes Chrome
Steel, Hard 440c Stainless Steel, Soft 302 &
316 Stainless Steel, Brass, Aluminum and Soft
Carbon Steel. We carry glass from one millimeter to
ten millimeters. In addition we stock plastic balls
in Polyethylene, Polypropylene, Nylon, and PTFE.
Any other materials are custom made to your
requirements
See: Tech Data Sheets 1-15.
Standard Extensions
Standard Extensions raise and extend C. M.
M. Probe Characterizing and C. N. C. Target
Spheres. They are also used to securely couple
measuring devices to the C. M. M. or C. N. C.
table.
See: Technical Data Sheet
CMM-12
| Part # | Description | Price | Purchase |
|---|---|---|---|
| BO-EP-3 | BIG ONE, EXTENSION 3 INCHES, 2" DIAMETER | $37.40 | |
| BO-EP-6 | BIG ONE, EXTENSION 6 INCHES, 2" DIAMETER | $40.70 | |
| P-EP-2 | EXTENSION, 2 INCHES, 1 1/4" DIAMETER | $38.15 | |
| P-EP-3 | EXTENSION, 3 INCHES, 1 1/4" DIAMETER | $38.15 | |
| P-EP-6 | EXTENSION, 6 INCHES, 1 1/4" DIAMETER | $39.44 | |
The Tri-mount Collar
The Tri-mount Collar is used to hold three or
more separate Ball Bars (Dumbbells) all at the same
time, on the anchor or the Heavy Duty Stand. No hand
contact with the Ball Bars (Dumbbells) by the
calibration technician is required, and three
different positions can be set at once. This is
important because the Ball Bars (Dumbbells) are
rather long devices which may be sensitive to
temperature change.
See: Technical Data
Sheet CMM-13 Page 1
| Part # | Description | Price | Purchase |
|---|---|---|---|
| AN-3 | COLLAR, TRI-MOUNT FOR ANCHOR | $274.00 | |
| FS-3 | TRI-MOUNT COLLAR, 2 INCH DIAMETER THROUGH HOLE, FOR HEAVY DUTY STAND | $273.00 | |
| FS-3BB | TRI-MOUNT COLLAR AND THREE SINGLE BALL BAR CLAMPS | $604.00 | |
Three Ball Kinematic Platform
The Three Ball Kinematic Platform is used to
create a microinch accurate reference datum for the
Ultra Precise Ball Bar (Dumbbell). The Ball Bar
(Dumbbell) Sphere is cradled between three balls.
This is used as part of the Quick Grip Stand System.
When the Ball Bar (Dumbbell) position is changed this
Kinematic support will remain in the same
position.
See: Three Ball Kinematic Mount.
| Part # | Description | Price | Purchase |
|---|---|---|---|
| 3B-KM | THREE BALL KINEMATIC PLATFORM, 4" | $215.00 | |
Two Ball Kinematic Coupling
The Two Ball Kinematic Coupling is a super
rigid holding device used to support The Ultra
Precise Ball Bar (Dumbbell) on its cylinder. It
eliminates deflection errors caused by the contact
force of the probe, while measuring. It is used with
the Ultra Precise Ball Bar (Dumbbell) and the Quick
Grip System.
See: Tech Data Sheet:
CMM-3.
| Part # | Description | Price | Purchase |
|---|---|---|---|
| 2B-KM | TWO BALL KINEMATIC COUPLING FOR QUICK GRIP STANDS | $179.00 | |
| 2B-KM-8 | TWO BALL KINEMATIC COUPLING FOR FS-1BB, BALL BAR | $179.00 | |
| 2B-KM-M | TWO BALL KINEMATIC COUPLING, MAGNETIC | $179.00 | |
| 2B-KM-H | TWO BALL KINEMATIC COUPLING FOR HEIGHT GAGE | $179.00 | |
The Ultra Precise Ball Bar (Dumbbell)
The Ultra Precise Ball Bar (Dumbbell) has
spheres that are round within 2.5 microinches (63.5
nm) and just behind these balls are special cylinders
which are straight and round within 2.5 microinches
(63.5 nm). The cylinder is used to kinematically
support the Ball Bar (Dumbbell) near the very ends of
the Bar, which eliminates deflection errors caused by
the contact force of the measuring probe. The 1"
(25.4 mm) balls are Hardened Stainless Steel 58RC.
They are matched in size and spherical within 2.5
microinches (63.5 nm). Most Commonly used with the
Quick Grip Stand with kinematic coupling.
See: Tech Data
Sheet: CMM-5.
Ultra Precise Ball Bar, Stainless Steel, Pricing
| Part # | Description | Price | Purchase |
|---|---|---|---|
| UP-BB-200 | BALL BAR, ULTRA PRECISION, STEEL 0200 MM, 7.874 INCHES | $782.00 | |
| UP-BB-300 | BALL BAR, ULTRA PRECISION, STEEL 0300 MM, 11.8 INCHES | $782.00 | |
| UP-BB-350 | BALL BAR, ULTRA PRECISION, STEEL 0350 MM, 13.779 INCHES | $782.00 | |
| UP-BB-400 | BALL BAR, ULTRA PRECISION, STEEL 0400 MM, 15.748 INCHES | $801.00 | |
| UP-BB-450 | BALL BAR, ULTRA PRECISION, STEEL 0450 MM, 17.7 INCHES | $801.00 | |
| UP-BB-500 | BALL BAR, ULTRA PRECISION, STEEL 0500 MM, 19.685 INCHES | $814.00 | |
| UP-BB-550 | BALL BAR, ULTRA PRECISION, STEEL 0550 MM, 21.653 INCHES | $843.00 | |
| UP-BB-600 | BALL BAR, ULTRA PRECISION, STEEL 0600 MM, 23.622 INCHES | $843.00 | |
| UP-BB-650 | BALL BAR, ULTRA PRECISION, STEEL 0650 MM, 25.59 INCHES | $843.00 | |
| UP-BB-700 | BALL BAR, ULTRA PRECISION, STEEL 0700 MM, 27.559 INCHES | $865.00 | |
| UP-BB-750 | BALL BAR, ULTRA PRECISION, STEEL 0750 MM, 29.528 INCHES | $865.00 | |
| UP-BB-800 | BALL BAR, ULTRA PRECISION, STEEL 0800 MM, 31.496 INCHES | $876.00 | |
| UP-BB-850 | BALL BAR, ULTRA PRECISION, STEEL 0850 MM, 33.464 INCHES | $878.00 | |
| UP-BB-900 | BALL BAR, ULTRA PRECISION, STEEL 0900 MM, 35.433 INCHES | $878.00 | |
| UP-BB-950 | BALL BAR, ULTRA PRECISION, STEEL 0950 MM, 37.401 INCHES | $879.00 | |
| UP-BB-1000 | BALL BAR, ULTRA PRECISION, STEEL 1000 MM, 39.37 INCHES | $879.00 | |
Ultra Precise Ball Bar, Invar, Pricing
| Part # | Description | Price | Purchase |
|---|---|---|---|
| UP-BB-INV-200 | BALL BAR, ULTRA PRECISION, INVAR® 0200 MM, 7.874 INCHES | $892.00 | |
| UP-BB-INV-300 | BALL BAR, ULTRA PRECISION, INVAR® 0300 MM, 11.8 INCHES | $892.00 | |
| UP-BB-INV-350 | BALL BAR, ULTRA PRECISION, INVAR® 0350 MM, 13.779 INCHES | $892.00 | |
| UP-BB-INV-400 | BALL BAR, ULTRA PRECISION, INVAR® 0400 MM, 15.748 INCHES | $911.00 | |
| UP-BB-INV-450 | BALL BAR, ULTRA PRECISION, INVAR® 0450 MM, 17.7 INCHES | $911.00 | |
| UP-BB-INV-500 | BALL BAR, ULTRA PRECISION, INVAR® 0500 MM, 19.685 INCHES | $924.00 | |
| UP-BB-INV-550 | BALL BAR, ULTRA PRECISION, INVAR® 0550 MM, 21.653 INCHES | $953.00 | |
| UP-BB-INV-600 | BALL BAR, ULTRA PRECISION, INVAR® 0600 MM, 23.622 INCHES | $953.00 | |
| UP-BB-INV-650 | BALL BAR, ULTRA PRECISION, INVAR® 0650 MM, 25.59 INCHES | $953.00 | |
| UP-BB-INV-700 | BALL BAR, ULTRA PRECISION, INVAR® 0700 MM, 27.559 INCHES | $975.00 | |
| UP-BB-INV-750 | BALL BAR, ULTRA PRECISION, INVAR® 0750 MM, 29.528 INCHES | $975.00 | |
| UP-BB-INV-800 | BALL BAR, ULTRA PRECISION, INVAR® 0800 MM, 31.496 INCHES | $986.00 | |
| UP-BB-INV-850 | BALL BAR, ULTRA PRECISION, INVAR® 0850 MM, 33.464 INCHES | $988.00 | |
| UP-BB-INV-900 | BALL BAR, ULTRA PRECISION, INVAR® 0900 MM, 35.433 INCHES | $988.00 | |
| UP-BB-INV-950 | BALL BAR, ULTRA PRECISION, INVAR® 0950 MM, 37.401 INCHES | $989.00 | |
| UP-BB-INV-1000 | BALL BAR, ULTRA PRECISION, INVAR® 1000 MM, 39.37 INCHES | $989.00 | |
The Universal 4" Platform
The Universal 4" Platform is used to securely
couple a variety of measuring devices, such as Probe
Characterization Spheres, to the C. M. M. and C. N.
C. table.
See: Tech Data Sheet:
CMM-6A.
| Part # | Description | Price | Purchase |
|---|---|---|---|
| PLT-4 | PLATFORM, 4 INCHES | $158.00 | |
